google-site-verification: googled3c3e413b380c91e.html help with knowing how much insulation and UV ratineg you may need | Midcoast Home Designs

Does Your House Feel Cold? Drafty, cold house. Ideas to find and fix the problems.

Is your home cold even though your windows are closed and locked?

If you feel that your house is always cold even though the thermostat is turned up, the windows are closed and locked but you still need a blanket just to watch TV? Here are some ways to see what to do to find the reason why it’s still cold.

Heat is very “lightweight”, it rises no matter what. If you have a ceiling fan flip the switch to counter-clockwise. It will circulate the heat downward. Then opposite in the warmer months for cool air because it is heavy and it will circulate it upward.

Adequate Attic Insulation

blown insulationYou should also have your insulation quantity in the attic checked. A local building contractor can do this for you. Some of the Big Box stores offer the service as well. If you live in Maine I suggest making sure you have at least 18” to 24” of insulation in your attic. An R-60 is the best for the Northern States. This amount of insulation also helps for the Summer months as well. Keeping the air conditioned cool air in your home from escaping.

Putting plastic window wraps on the interior of your windows in the Fall can help as well windows that maybe 10 years or older. If you have an oil furnace have it checked and cleaned yearly. The best solution which can be a bit costly, is to make sure your windows are energy efficient. With a SHGC (solar heat gain coefficient) and U-Factor at least a 0.28 or lower. This number can be calculated and is also found on the sticker of a new window.

U-Factor

windowstickerThe U-factor measures how well a window prevents heat from escaping. The rate of heat loss is indicated in terms of the U-factor (U-value) of a window assembly. A U-factor is the inverse of an R-value. If you divide the U-factor into 1 you get the equivalent R-value. U-factor ratings generally fall between 0.07 and 1.20. The lower the U-value (the higher the R-value), the greater a window’s resistance to heat flow and the better its insulating value.

For example, a U-.33 = R -3 (typical for low-e windows); a U-.50 = R-2 (typically for double-glazed windows).

Solar Heat Gain Coefficient

The solar heat gain coefficient (SHGC) measures how well glass blocks heat in sunlight. The SHGC is the fraction of solar radiation admitted through a window (both directly transmitted and absorbed) and released inward or how much heat gain is blocked by the window. SHGC is expressed as a number between 0 and 1. The lower a window’s solar

Benefits to Low SHGC

Windows with low SHGC will help to keep the house from warming due to direct sunlight. There are other benefits for the home owner. Sometimes there are tax incentives for replacing inefficient windows with low-E windows. But within the home, these windows will also help to prevent color fading of furniture and curtains. Condensation will also be reduced. Looking at the big picture, using efficient windows reduces the overall load on utility services and reduces emissions.

heat gain coefficient, the less solar heat it transmits in the house. The lower the number, the better for east and west windows; the higher the number, the better for south windows.

ceramic heaterPortable Electric Heaters

Portable electric heaters that have auto off when tipped over or reach a certain temperature can also help take the edge off. They area fairly inexpensive and can be moved anywhere in a house.

Leave a Reply

SS construction 19

SS construction
Proudly using Dynamic Headers by Nicasio WordPress Design